KynSHOT Hydraulic Recoil Buffer

Description

KynSHOT RB5000

•  The RB5000 KynSHOT Recoil Buffer is designed to fit AR-15 carbines with a collapsible stock. Made using 17-4 stainless steel, the KynSHOT RB5000 Recoil Buffer is a proven system that has seen heavy use with civilian competition shooters, law enforcement personnel and the United States Armed Forces. This buffer has patented damping technology to absorb the shock of impact from the bolt carrier’s rearward motion and prevent bolt bounce as a new cartridge is chambered. The KynSHOT RB5000 Recoil Buffer reduces felt recoil by 20-30%, while largely eliminating muzzle flip.The improvement in weapon accuracy – specifically second and third shot accuracy- is large as shooters report that their time to reacquire a target decreases, and in many cases never leaves their scope sights.

KynSHOT RB5000HP

• The KynSHOT RB5000HP Recoil Buffer is designed For AR-15 applications that run excessively hard such as suppressed, over-gassed carbines or “Thumpers” like the .50 Beowulf and .458 SOCOM. Please contact us to verify your application.
• Made using 17-4 stainless steel, the RB5000HP KynSHOT Recoil Buffer AR-15 is a proven system that has seen heavy use with civilian competition shooters, law enforcement personnel and the United States Armed Forces. This buffer has patented damping technology to absorb the shock of impact from the bolt carrier’s rearward motion and to prevent bolt bounce as a new cartridge is chambered. The RB5000HP KynSHOT Recoil Buffer reduces felt recoil by 20-30%, while largely eliminating muzzle flip.The improvement in weapon accuracy – specifically second and third shot accuracy- is large as shooters report that their time to reacquire a target decreases, and in many cases never leaves their scope sights.

KynSHOT RB5000L

• The KynSHOT RB5000L Hydraulic Recoil Buffer is optimized for use with light loads, including subsonic ammunition and .300 BLK. The RB5000L has seen heavy use with civilian competition shooters, law enforcement personnel, and the United Sates Armed Forces. This buffer has patented damping technology to absorb the shock of impact from the bolt carrier’s rearward motion and to prevent bolt bounce as a new cartridge is chambered. This model is made lighter and requires less force to cycle than the standard AR-15 KynSHOT Buffer. This is intended for soft cycling or under gassed guns that will not lock back on the last round with the standard carbine hydraulic buffer or heavier buffers. .300 BLK guns running exclusively supersonic ammo may be fine with a standard hydraulic buffer if the bolt cycles firmly and has proper ejection placement

AR-15 9MM PLATFORM

KynSHOT RB5007

•  The RB5007 is a specially engineered KynSHOT for the 9mm PCC application. Designed in cooperation with Blitzkrieg Components, LLC. to work in PCC builds with 3.5″ – 16″ barrels, either suppressed or unsuppressed and with all common 9mm loads. This buffer has proven itself in the harsh arena of PCC competition and is the choice of many of the top ranked shooters in the world. The KynSHOT uses patented hydraulic shock absorption technology to dampen the impact of the bolt at the rear of its travel and to dampen the forward impact of the buffer’s weight as it chambers the next round. Its weight and length have been optimized for the 9mm application so that it runs reliably, softens recoil, smooths out the action, and stops just behind the bolt catch.

AR-10 .308  PLATFORM

KynSHOT RB5004 “Shorty”

•  The KynSHOT RB5004 “Shorty” Recoil Buffer is designed for AR-10 carbines with a collapsible stock and an AR-15 length (7.0″) buffer tube which is common on many AR-10 applications. The RB5004 reduces felt recoil 20-30%, while largely eliminating muzzle flip. The improvement in weapon accuracy – specifically second and third shot accuracy – is even more noticeable as shooters report that their time to reacquire a target decreases, and in many cases never leaves their scope sights. This buffer has patented damping technology to absorb the shock of impact from the bolt carrier’s rearward motion and to prevent bolt bounce as a new cartridge is chambered.

KynSHOT RB5005

•  The KynSHOT RB5005 Recoil Buffer is designed for AR-10 carbines with a collapsible stock that use the standard AR-10 length tubes that are 7.75″ deep on the inside. The RB5005 reduces felt recoil 20-30%, while largely eliminating muzzle flip.  The improvement in weapon accuracy – specifically second and third shot accuracy – is even more noticeable as shooters report that their time to reacquire a target decreases, and in many cases never leaves their scope sights. This buffer has patented damping technology to absorb the shock of impact from the bolt carrier’s rearward motion and to prevent bolt bounce as a new cartridge is chambered.

BENEFITS

• Drop-In Replacement
• Reduce felt recoil
• Improve reliability
• Reduce bolt carrier speed
• Reduce wear on parts
• Reduce shock and vibration to optics
• Suppress bolt bounce
• Decrease sight movement
• Smoother operation
• Faster shot recovery time
• Military grade materials and manufacturing